Motul Boost and Clean Moto petrol additive engine cleaner 200 ml

If your motorcycle is hard to start, idles unevenly, responds less under acceleration or uses more fuel than usual, the cause is often dirt built up in the carburettors, injectors, valves and combustion chamber. Motul Boost and Clean Moto is an additive to pour into the petrol that works on both fronts: it raises the octane number and, at the same time, cleans and lubricates the entire fuel system. It suits all 2- and 4-stroke motorcycle engines and is compatible with E10 petrol, containing 10% ethanol.

What it does

The formula works on two fronts. By raising the octane number, Motul Boost and Clean Moto helps to:

• improve combustion and performance;
• improve ignition and acceleration;
• keep the combustion chamber clean;
• limit knocking and abnormal combustion.

At the same time, thanks to its cleaning action, it helps to:

• clean carburettors and injectors, for better fuel atomisation;
• prevent deposits and varnish forming on the intake valves and in the combustion chambers;
• disperse condensation water, to prevent fuel oxidation.

Benefits with regular use

According to the manufacturer, regular use ensures:

• better engine performance and riding comfort;
• better combustion: ignition, acceleration and idling;
• fuel savings;
• longer life for the fuel system and the catalytic converter;
• lower pollutant emissions.

When to use it

The treatment is recommended when the motorcycle shows excessive fuel consumption, black exhaust smoke, loss of power under acceleration, a slight drop in power or starting difficulties. Repeated at regular intervals, it helps keep the fuel system clean even when there are no obvious symptoms.

How to use

Pour one 200 ml can of Motul Boost and Clean Moto directly into the tank before refuelling, then fill the tank as usual. For greater effect, repeat the treatment every two tank fills.

Which motorcycles it suits

It is designed for 4-stroke and 2-stroke motorcycle engines, both carburettor and fuel-injected, where it cleans the carburettors and injectors respectively. Being compatible with E10 petrol, it can be used with the fuels most common at the pump today.

Technical data sheet

• Brand: Motul
• Type: octane booster and cleaner, additive to be added to petrol
• For 2- and 4-stroke motorcycle engines
• Cleans carburettors, injectors, valves and combustion chamber
• Compatible with E10 petrol (10% ethanol)
• Pack: 200 ml can
• Dosage: one can per treatment, to be repeated every two tank fills

Frequently asked questions

Can it be used on a 2-stroke engine?

Yes. Motul Boost and Clean Moto is designed for all types of 2- and 4-stroke motorcycle engines.

Is it compatible with E10 petrol?

Yes, the manufacturer states it is compatible with E10 fuels, containing 10% ethanol.

How much product should I pour in?

One 200 ml can, directly into the tank before refuelling.

How often should the treatment be repeated?

For greater effect the manufacturer recommends repeating it every two tank fills.

Is it fine for fuel-injected engines too?

Yes: it cleans the injectors, for better atomisation, and the carburettors. The manufacturer also states a longer life for the catalytic converter with regular use.

Always refer to the information on the pack and to the manufacturer's safety data sheet.