AFAM Chain Kits are the easiest and most economical way to purchase and install chains and sprockets! Putting a new chain on a machine with worn sprockets will rob you of power and quickly wear out the chain. AFAM Chain Kits eliminate this problem and are more economical than purchasing all the pieces separately. The kits have the correct length of chain for your application (with a choice of grade), a master link (rivet, clip or screw type), counter shaft sprocket (stock or non-stock size) and rear sprocket (steel, aluminum, self cleaning or WorksLite™ Type II, stock or non-stock size). Each kit is attractively packaged and includes easy to follow instructions. The chain supplied in the kit is premium quality, sourced from the leading Japanese and Italian manufacturers. The grade of chain depends upon the size of motorcycle, type of use and your choice of which level of quality you require. In addition to the standard rivet type and clip type master links, AFAM kits can be ordered with the screw type. The screw type master link has special nuts to press the side plate onto the master link pins. After the side plate has been pressed all the way onto the pins, the special nuts are removed. The protruding pins are then snapped off at the notch. The small "O" rings fit into the grooves outboard of the sideplate (or safety wire can be used). This patented link eliminates the need for expensive riveting tools, an 8mm wrench and pair of pliers are all that is needed. Compatible with: - Honda: VFR 750 88-89_M